HCP product catalogue
Start with the application, then compare the relevant HCP series. Every card links to the current manufacturer record; detailed local guides explain the evidence needed before a model is chosen.
23current HCP series and equipment groups
4clear product sections
1duty-led selection route
7 product groups
Sewage, effluent, cutter, grinder, sump-oriented and stainless-steel submersible families.
HCP lists vortex, open and channel impeller configurations within the AF family for different wastewater duties.
Before selection: Check the liquid, solids, flow, total head, discharge connection and installation arrangement for the exact model.
The FN family includes several compact sewage and effluent models with model-specific impeller and solids-passage arrangements.
Before selection: Use the full model code and current manufacturer data; limits shown for one FN model must not be applied to another.
HCP describes AFC as a cutter-pump family using a cutting impeller for suitable wastewater applications.
Before selection: Describe the material reaching the pump and the whole duty; a cutter pump is not assumed suitable for every waste stream.
AL is a separate wastewater and effluent family which HCP presents with open-impeller configurations.
Before selection: Match the exact model to the duty point, solids, materials, electrical supply and discharge arrangement.
The AN family includes wastewater and sump-oriented models; HCP identifies a shallow-water arrangement for a specific AN variant.
Before selection: Do not apply the shallow-water description to the whole family; confirm the precise suffix and installation detail.
HCP identifies a radial cutter and cutter-ring arrangement on the GF grinder-pump family.
Before selection: Check the incoming material, required flow and head, pipework, run pattern and controls before choosing a GF model.
HCP lists stainless-steel hydraulic components and chemical-resistant sealing materials for the SF and SA families.
Before selection: Material names and pH references are not a universal chemical-compatibility approval; identify the actual liquid and concentration.
6 product groups
Portable drainage, construction dewatering, circulating-water, sump and slurry families.
HCP presents POND as a fresh-water and fish-pond sump family for intermittent operation.
Before selection: The manufacturer warns against sediment or chemicals, so this is not a general dirty-water family.
HCP lists IC for dewatering, circulating-water and irrigation applications.
Before selection: Confirm the exact duty and approvals; the family name does not establish drinking-water, borehole or solar suitability.
GD and GD-R are portable dewatering families, with low-level drainage statements attached only to named GD-R variants.
Before selection: Confirm whether the enquiry is for GD or GD-R and provide the liquid, solids, depth, hose or pipework and power supply.
HCP presents HD for construction and basin dewatering across a range of model sizes.
Before selection: Solids, abrasion, run time and hydraulic duty vary by model and need checking from current data.
HDG is HCP's slurry-dewatering family and the manufacturer describes an agitator arrangement for sediment duties.
Before selection: Send the liquid density, sediment, particle size, required duty and run pattern; slurry is not one standard liquid.
HCP lists BD as a separate construction and basin dewatering family.
Before selection: Do not combine BD and HD data because the applications overlap; use the exact model record and duty point.
3 product groups
Higher-flow submersible and axial-flow families that need a complete hydraulic and installation brief.
HCP lists L as a large-volume submersible pump family for duties where flow demand is the main starting point.
Before selection: Provide the full flow and total-head requirement, water level range, installation, discharge route and power supply.
LH is shown by HCP as a separate large-volume submersible family rather than a suffix of the L range.
Before selection: Check the current LH performance record for the exact model and UK electrical arrangement.
HCP lists LA as its submersible axial-flow pump family.
Before selection: Axial-flow selection depends on the complete hydraulic and installation duty, not the family label alone.
7 product groups
Ejector and aquatic pumps, explosion-proof configurations, guide rails, level controls and surface-pump families.
HCP lists J as a submersible ejector-pump family.
Before selection: Describe the treatment or circulation objective, tank geometry, liquid, required duty and operating pattern.
HCP lists FN-A1 as a multi-functional aquatic pump family.
Before selection: State the water application, duty, installation and electrical arrangement before selecting a model.
HCP groups selected AF, AL and GF configurations under an explosion-proof side-discharge range.
Before selection: Hazardous-area suitability needs the exact certification, zone, gas or dust group, temperature class and site design checked by competent people.
GRS is HCP's guide-rail-system range for suitable fixed submersible pump installations.
Before selection: Match the rail system, discharge connection, lifting arrangement and pump interface to the exact installation.
HCP lists float switches as control accessories for suitable pump and level-control arrangements.
Before selection: Check electrical rating, cable, switching logic, level range, panel design and the available movement inside the chamber.
HCP lists HVM and SH as vertical multistage centrifugal in-line pump families.
Before selection: Provide the liquid, required flow and head, pressure limits, materials, connections, motor supply and control method.
HCP lists HWPD as a coaxial centrifugal pump family.
Before selection: Confirm the current model range, hydraulic duty, liquid, materials, connection and motor details before specification.
Detailed guides
Compare AF, FN, AL and AN, then send the liquid, solids, duty, installation and controls.
View wastewater familiesGF and AFC use different cutting arrangements and cannot be selected by label alone.
Compare GF and AFCSeparate a clean-water sump from construction water or abrasive slurry before choosing a family.
View dewatering and sump familiesCurrent technical data
Series names help narrow the search. The final choice must use the current manufacturer record for the exact model and UK electrical supply.
Need help with an HCP pump?
